Skip to content

Intensive Trainings

Loading Events

« All Events

  • This event has passed.

Drilling Essentials for New Engineers and Non-Technical Professionals

February 21 - February 23

drilling training

Why Choose this Training Course

This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig operations. Drilling problems, reasons & solutions as well as well intervention operations after putting the well on production are included as well.

The drilling training course will assist participants (managerial/ supporting role) to significantly contribute towards ensuring that well project delivery targets are met, within the approved (AFE) and with minimal (NPT).

Who Should Attend

  • Accounting & Commercial
  • Business Development
  • Estimation & Proposal
  • Finance & Administration
  • Human Resources
  • IT Support
  • Geology
  • Joint Ventures
  • Legal
  • Logistics & HSE
  • Planning & Budgeting
  • Procurement & Supply Chain
  • Tenders & Contracts

Key Learning Objectives

  • Understand well objectives, planning and design process
  • Understand drilling cost considerations and factors impacting the cost
  • Learn various types of Onshore/Offshore rig and rigless operations
  • Learn drilling rig systems and functions
  • Understand the role of key Drilling Personnel and Service Providers
  • Understand the drilling and completion sequence
  • Learn workover operations role and functions
  • Understand the difference of Drilling Vs. Workover operations
  • Understand Common Challenges in drilling operations
  • Learn practical methods of design
  • Plan and install safe and efficient well completion and workover
  • Improve well productivity by integrating the importance of completion process
  • To future production in order to enhance performance and failures.
  • Enhance the effectiveness and efficiency of work performance by learning ways to conduct operations smoothly in a correct technique.
  • Enhance the decision-making cycle and effectiveness of the process and contribute towards ensuring that delivery targets are met, within the approved (AFE) and minimal (NPT).
  • Describe the well planning process & appreciate each element in the planning process.
  • Understand major cost components of drilling operations and its impact for better project planning and management.
  • Describe the basic sequence of onshore & offshore drilling as well as completion
  • Identify drilling rigs and major relevant equipment
  • Understand drilling operations functions for deeper understanding of technical and logistical considerations.

Enquiry Form

  • This is just an approximate number. You can finalise it when you send in the registration form.

Details

Start:
February 21
End:
February 23
Series:
Event Category:
Event Tags:
, ,

Venue

Kuala Lumpur
Federal Territory of Kuala Lumpur, Kuala Lumpur Malaysia

Organiser

Opus Kinetic Pte Ltd
Phone
+65 6294 6415
Email
info@opuskinetic.com
View Organiser Website
drilling training

Why Choose this Training Course

This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig operations. Drilling problems, reasons & solutions as well as well intervention operations after putting the well on production are included as well.

The drilling training course will assist participants (managerial/ supporting role) to significantly contribute towards ensuring that well project delivery targets are met, within the approved (AFE) and with minimal (NPT).

Who Should Attend

  • Accounting & Commercial
  • Business Development
  • Estimation & Proposal
  • Finance & Administration
  • Human Resources
  • IT Support
  • Geology
  • Joint Ventures
  • Legal
  • Logistics & HSE
  • Planning & Budgeting
  • Procurement & Supply Chain
  • Tenders & Contracts

Key Learning Objectives

  • Understand well objectives, planning and design process
  • Understand drilling cost considerations and factors impacting the cost
  • Learn various types of Onshore/Offshore rig and rigless operations
  • Learn drilling rig systems and functions
  • Understand the role of key Drilling Personnel and Service Providers
  • Understand the drilling and completion sequence
  • Learn workover operations role and functions
  • Understand the difference of Drilling Vs. Workover operations
  • Understand Common Challenges in drilling operations
  • Learn practical methods of design
  • Plan and install safe and efficient well completion and workover
  • Improve well productivity by integrating the importance of completion process
  • To future production in order to enhance performance and failures.
  • Enhance the effectiveness and efficiency of work performance by learning ways to conduct operations smoothly in a correct technique.
  • Enhance the decision-making cycle and effectiveness of the process and contribute towards ensuring that delivery targets are met, within the approved (AFE) and minimal (NPT).
  • Describe the well planning process & appreciate each element in the planning process.
  • Understand major cost components of drilling operations and its impact for better project planning and management.
  • Describe the basic sequence of onshore & offshore drilling as well as completion
  • Identify drilling rigs and major relevant equipment
  • Understand drilling operations functions for deeper understanding of technical and logistical considerations.

Enquiry Form

  • This is just an approximate number. You can finalise it when you send in the registration form.

Details

Start:
8th March 2023
End:
10th March 2023
Series:
Event Category:
Event Tags:
, ,

Venue

Kuala Lumpur
Federal Territory of Kuala Lumpur, Kuala Lumpur Malaysia

Organiser

Opus Kinetic Pte Ltd
Phone
+65 6294 6415
Email
info@opuskinetic.com
View Organiser Website
drilling training

Why Choose this Training Course

This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig operations. Drilling problems, reasons & solutions as well as well intervention operations after putting the well on production are included as well.

The drilling training course will assist participants (managerial/ supporting role) to significantly contribute towards ensuring that well project delivery targets are met, within the approved (AFE) and with minimal (NPT).

Who Should Attend

  • Accounting & Commercial
  • Business Development
  • Estimation & Proposal
  • Finance & Administration
  • Human Resources
  • IT Support
  • Geology
  • Joint Ventures
  • Legal
  • Logistics & HSE
  • Planning & Budgeting
  • Procurement & Supply Chain
  • Tenders & Contracts

Key Learning Objectives

  • Understand well objectives, planning and design process
  • Understand drilling cost considerations and factors impacting the cost
  • Learn various types of Onshore/Offshore rig and rigless operations
  • Learn drilling rig systems and functions
  • Understand the role of key Drilling Personnel and Service Providers
  • Understand the drilling and completion sequence
  • Learn workover operations role and functions
  • Understand the difference of Drilling Vs. Workover operations
  • Understand Common Challenges in drilling operations
  • Learn practical methods of design
  • Plan and install safe and efficient well completion and workover
  • Improve well productivity by integrating the importance of completion process
  • To future production in order to enhance performance and failures.
  • Enhance the effectiveness and efficiency of work performance by learning ways to conduct operations smoothly in a correct technique.
  • Enhance the decision-making cycle and effectiveness of the process and contribute towards ensuring that delivery targets are met, within the approved (AFE) and minimal (NPT).
  • Describe the well planning process & appreciate each element in the planning process.
  • Understand major cost components of drilling operations and its impact for better project planning and management.
  • Describe the basic sequence of onshore & offshore drilling as well as completion
  • Identify drilling rigs and major relevant equipment
  • Understand drilling operations functions for deeper understanding of technical and logistical considerations.

Enquiry Form

  • This is just an approximate number. You can finalise it when you send in the registration form.

Details

Start:
18th July 2022
End:
20th July 2022
Series:
Event Category:
Event Tags:
, ,

Venue

Kuala Lumpur
Federal Territory of Kuala Lumpur, Kuala Lumpur Malaysia

Organiser

Opus Kinetic Pte Ltd
Phone
+65 6294 6415
Email
info@opuskinetic.com
View Organiser Website
drilling training

Why Choose this Training Course

This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig operations. Drilling problems, reasons & solutions as well as well intervention operations after putting the well on production are included as well.

The drilling training course will assist participants (managerial/ supporting role) to significantly contribute towards ensuring that well project delivery targets are met, within the approved (AFE) and with minimal (NPT).

Who Should Attend

  • Accounting & Commercial
  • Business Development
  • Estimation & Proposal
  • Finance & Administration
  • Human Resources
  • IT Support
  • Geology
  • Joint Ventures
  • Legal
  • Logistics & HSE
  • Planning & Budgeting
  • Procurement & Supply Chain
  • Tenders & Contracts

Key Learning Objectives

  • Understand well objectives, planning and design process
  • Understand drilling cost considerations and factors impacting the cost
  • Learn various types of Onshore/Offshore rig and rigless operations
  • Learn drilling rig systems and functions
  • Understand the role of key Drilling Personnel and Service Providers
  • Understand the drilling and completion sequence
  • Learn workover operations role and functions
  • Understand the difference of Drilling Vs. Workover operations
  • Understand Common Challenges in drilling operations
  • Learn practical methods of design
  • Plan and install safe and efficient well completion and workover
  • Improve well productivity by integrating the importance of completion process
  • To future production in order to enhance performance and failures.
  • Enhance the effectiveness and efficiency of work performance by learning ways to conduct operations smoothly in a correct technique.
  • Enhance the decision-making cycle and effectiveness of the process and contribute towards ensuring that delivery targets are met, within the approved (AFE) and minimal (NPT).
  • Describe the well planning process & appreciate each element in the planning process.
  • Understand major cost components of drilling operations and its impact for better project planning and management.
  • Describe the basic sequence of onshore & offshore drilling as well as completion
  • Identify drilling rigs and major relevant equipment
  • Understand drilling operations functions for deeper understanding of technical and logistical considerations.

Enquiry Form

  • This is just an approximate number. You can finalise it when you send in the registration form.

Details

Start:
14th February 2022
End:
16th February 2022
Series:
Event Category:
Event Tags:
, ,

Venue

Kuala Lumpur
Federal Territory of Kuala Lumpur, Kuala Lumpur Malaysia

Organiser

Opus Kinetic Pte Ltd
Phone
+65 6294 6415
Email
info@opuskinetic.com
View Organiser Website
drilling training

Why Choose this Training Course

This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig operations. Drilling problems, reasons & solutions as well as well intervention operations after putting the well on production are included as well.

The drilling training course will assist participants (managerial/ supporting role) to significantly contribute towards ensuring that well project delivery targets are met, within the approved (AFE) and with minimal (NPT).

Who Should Attend

  • Accounting & Commercial
  • Business Development
  • Estimation & Proposal
  • Finance & Administration
  • Human Resources
  • IT Support
  • Geology
  • Joint Ventures
  • Legal
  • Logistics & HSE
  • Planning & Budgeting
  • Procurement & Supply Chain
  • Tenders & Contracts

Key Learning Objectives

  • Understand well objectives, planning and design process
  • Understand drilling cost considerations and factors impacting the cost
  • Learn various types of Onshore/Offshore rig and rigless operations
  • Learn drilling rig systems and functions
  • Understand the role of key Drilling Personnel and Service Providers
  • Understand the drilling and completion sequence
  • Learn workover operations role and functions
  • Understand the difference of Drilling Vs. Workover operations
  • Understand Common Challenges in drilling operations
  • Learn practical methods of design
  • Plan and install safe and efficient well completion and workover
  • Improve well productivity by integrating the importance of completion process
  • To future production in order to enhance performance and failures.
  • Enhance the effectiveness and efficiency of work performance by learning ways to conduct operations smoothly in a correct technique.
  • Enhance the decision-making cycle and effectiveness of the process and contribute towards ensuring that delivery targets are met, within the approved (AFE) and minimal (NPT).
  • Describe the well planning process & appreciate each element in the planning process.
  • Understand major cost components of drilling operations and its impact for better project planning and management.
  • Describe the basic sequence of onshore & offshore drilling as well as completion
  • Identify drilling rigs and major relevant equipment
  • Understand drilling operations functions for deeper understanding of technical and logistical considerations.

Enquiry Form

  • This is just an approximate number. You can finalise it when you send in the registration form.

Details

Start:
November 27
End:
November 29
Series:
Event Category:
Event Tags:
, ,

Venue

Kuala Lumpur
Federal Territory of Kuala Lumpur, Kuala Lumpur Malaysia

Organiser

Opus Kinetic Pte Ltd
Phone
+65 6294 6415
Email
info@opuskinetic.com
View Organiser Website
Verified by MonsterInsights